Fixed method of metal laminate!


Release time:

Nov 08,2021

When the cabinet body is processed and manufactured in the traditional home decoration project, the cabinet body metal laminate is usually fixed on the cabinet body side panel with nails or screws. The nails or screws are fixed with the cabinet body laminate 10 from the outside of the cabinet body side panel 20. Not only is the positioning inaccurate and prone to deviation, but also the stress is uneven, which is easy to cause the cabinet body surface damage, plate cracking, corner explosion, etc. The exposure of nails or screws also affects the appearance of the outside.

When the cabinet body is processed and manufactured in the traditional home decoration project, the cabinet body metal laminate is usually fixed on the cabinet body side panel with nails or screws. The nails or screws are fixed with the cabinet body laminate 10 from the outside of the cabinet body side panel 20. Not only is the positioning inaccurate and prone to deviation, but also the stress is uneven, which is easy to cause the cabinet body surface damage, plate cracking, corner explosion, etc. The exposure of nails or screws also affects the appearance of the outside.

JlqhnfTxTae5zrV6PNOXoA.jpg

There are ready-made metal laminates to purchase, which can be purchased according to the relative size. The installation process is simple and you can operate it by taking pictures. There is also a kind of slotting in the wall, preparing the laminate to be used in advance, opening a 1-inch deep slot on the wall according to the size of the laminate, putting the laminate in and then smoothing it with glue. The installation of the laminate in such a wall slot must be completed by relevant professional workers..


Fix the angle steel frame on the wall with expansion bolts, etc., and set the grid plate (movable method), or the carpenter shall fix and decorate according to the components (fixed and inseparable). The disadvantage of this method is that the angle steel frame is ugly, but books can be used to cover the diagonal brace for items such as books. The advantage is that the bearing capacity is high and it is suitable for heavier items and accessories.


Purchase finished metal laminates or special fixing frames and cantilever brackets (commonly used in shops), and fix them with plastic bolts or wooden wedge screws. The metal laminate can be made of glass plate, which is slightly higher in cost, beautiful in appearance, not too high in bearing capacity and strong in variability (the spacing between the upper and lower plates can be adjusted).


keywords